Open

Product by Category > Geotextiles > ACETex® Protect


Use & Purpose

  • Reinforcement
  • Separation

Highlights

General Information

ACETex® Protect is a woven geotextile made from durable high tenacity polypropylene fibres. The product has
been designed with high tensile strength and at moderate strain levels. The product has been manufactured
with additional additives to create a durable cover fabric.

Applications
ACETex® Protect is a woven geotextile that has been designed for specific applications requiring a well stabilised
cover fabric.

Typical applications are in landfills, where a geomembrane may require the additional assistance of a
sacrificial stable geotextile placed over the underlying geomembrane (primary containment layer) to assist
against UV membrane deterioration until such time as the landfill waste reaches a level such that full and
permanent cover is achieved.

Over 90% strength retention is achieved by ACETex Protect when tested in accordance with accelerated
weathering tests- ASTM D4355. Global Synthetics are willing to assist you in determining the suitability of
this product for your landfill project. Inter face shear testing has been carried out against both smooth and
textured geomembrane surfaces.

For further information please refer to the Technical Document located on your right.

 




Latest Posts

November 13th, 2020

December Webinar: SURFICIAL SLOPE STABILITY WITH ENGINEERED EARTH AMOURING SYSTEM PART 2

TOPIC: ANALYSING, DESIGN PROCEDURES & DESIGN EXAMPLES With introducing a new green structural system for reinforced walls.   DESCRIPTION: ARMORMAX® is an Engineered Earth...

Read More
September 29th, 2020

October Webinar: Surficial Slope Stability with Engineered Earth Armoring System- Part 1

ARMORMAX® is an Engineered Earth Armoring Solution used for surficial slope stability as well as permanent erosion control in vegetated and un-vegetated applications. With a verified carbon...

Read More
August 24th, 2020

September Webinar: Designing Composite Liners on Slopes Part 1: GCL

Don’t miss your chance to hear Prof. Kerry Rowe talk about his latest unpublished research findings at our webinar on Designing Composite Liners on Slopes Part 1:...

Read More
July 28th, 2020

August Webinar: Part 2 Reinforced Rail Tracks- Review of Design Guidelines and Procedures

WHEN:              13th AUGUST 2020 TIME:                 3.00PM AEST DURATION:      1HR DESCRIPTION Following on from our first successful webinar on Geogrid...

Read More


If you would like further information
about any of our products please

Contact Us
Contact Us