The use of liners in civil and environmental applications is becoming more widespread as there develops a greater understanding of the effects of contaminated ground conditions on structures and the environment.
Global Synthetics are able to offer a wide range of liners that are compatible with the diverse range of applications and contaminants likely to be encountered.
Bentofix® Geosynthetic Clay Liner (GCL) is a factory produced wide width rolls of bentonite “sandwiched” between layers of geotextile. GCL’s are an engineered replacement for traditional clay lining of proposed containment structures.
Global Synthetics Geosynthetic Clay Liners offer the designer an engineered equivalency to clay without the costly import and placement and quality control costs associated with this traditional method. The volume of containment may be significantly increased with the use of a Global Synthetics Geosynthetic Clay Liner as the product offers equivalency to very thick layers of compacted clay.
Bentofix® Geosynthetic Clay Liner – X Series
Bentofix® GCL with nonwoven cover geotextile and woven carrier geotextile. An additional surface polyethylene (PE) coating is applied in a liquid state and then allowed to solidify on the carrier geotextile. The additional bonding of a PE coating to the needle-punched, fibre reinforcement is permanently locked and increases the pull-out resistance as well as the internal shear strength. The mass coating is 200gsm (0.2mm thick) minimum for the smooth coating and exceeds the GRI-GCL3 (USA) minimum specification requirements for coated GCLs. Also features self-sealing side overlaps.
The coated (smooth), X-type GCL is used predominantly in the following applications:
Bentofix® – Environmental Protection
The project had been discussed for more than 40 years before the three-laned road (width 11.50 m) was finally constructed in 2002.View More Case Studies
September Webinar: Designing Composite Liners on Slopes Part 1: GCL
Don’t miss your chance to hear Prof. Kerry Rowe talk about his latest unpublished research findings at our webinar on Designing Composite Liners on Slopes Part 1:...Read More
August Webinar: Part 2 Reinforced Rail Tracks- Review of Design Guidelines and Procedures
WHEN: 13th AUGUST 2020 TIME: 3.00PM AEST DURATION: 1HR DESCRIPTION Following on from our first successful webinar on Geogrid...Read More
July Webinar: The Effect of External Parameters and GCL Structure on GCL Hyrdration
When: Wednesday 22 July Time: 3.00pm AEST Duration: 1 hr DESCRIPTION: The performance of a GCL as a single liner or as part of a Composite Liner...Read More
June Webinar: Geogrid Reinforced Rails Tracks
When: Wednesday 17th June Time: 5.30pm NZ ST Duration: 1 hr DESCRIPTION: This webinar will review and present the latest results of large scale...Read More